000			02065cam a22002174a 4500
008			1991
020			_a0672228254
040			_aGamadero _bspa _cGamadero
041			_aeng
050	0	0	_aT385 _bW767 _c1991
100			_aVictor Wright _91858
245	0	0	_aAutoCad _bPocket Command Reference
250			_a1ra. edicion
260	3		_aSAMS _bUnited States of America _c1991
300			_a96p _c13 x 17.5 cm
520			_aDimensioning Commands Whenever the DIM command is invoked from the Command: prompt, a new prompt, Dim:, appears and a new set of commands becomes active. To return to the Command: prompt, issue the command EXIT or hit CtrI-C. If the system variable DIMASO is 1 (on) (the default), each dimension is created as a single blocktype entity that is associated with given drawing details. STRETCHing the details changes the dimension value. If the system variable DIMASO is 0 (off), dimensions are drawn as separate line, solid (or block), and text entities. All dimensioning text is drawn in the text style that was current when the DIMensioning command was invoked unless the STYLE command is used within DIM to change it. To invoke a dimensioning command, type in the first three letters of the command name, although the full name is also acceptable: ALIgned draws a linear dimension that is aligned parallel to the selected origin points. ANGular draws a dimension arc to show the angle between two nonparallel lines (Release 11) or three specified points. BASeline draws a linear dimension from the starting point of the previous dimension to the new location. This may be repeated as desired to draw a series of dimensions from the same base point. CENter draws a center mark in an arc or circle. The system variable DIMEN defines the size of the mark; if the value is negative, center lines are drawn.
526			_aIngeniería en Tecnologías de la Información y Comunicación
650		0	_aProgramación _9729
942			_2lcc _cLIB _e1ra. edicion _n0
945			_a1270 _bMaría Elena Olvera Picina _c1270 _dMaría Elena Olvera Picina
999			_c8020 _d8020